2 Component Flexible Polymer

Cement Waterproofing Slurry A Cement based two component polymer rich system, which on mixing yield a brush able smooth slurry with excellent bond to most substrate.

• It is applied to concrete & Mortar structures to prevent water infiltration & dampness
• Easy to apply by brush, slurry consistency
• Improve bond strength on variety of surfaces
• Easy & Fast Mixing
• Reasonably Flexible to bridging up to 0.3 mm crack width.
• Protects against water penetration, salt & carbonation.
• Non-Toxics when cured, suitable for contact with drinking water
• Non-Corrosive to steel & iron.
• Allows surface to breath, preventing build up vapor pressure.     

Coverage: Depending on type of application, 2 coats are always required. The minimum recommended coverage of LARSEN CLEAN TECH WP 104 is 2.0 kg/m² for 1 mm thick coating, In extreme cases three coats may be required.